NOZZLE INSERTS  |
For straight water stream and long service life in
most inserted nozzles, use combined stainless steel/carbide nozzle
inserts  |
A - BODY - Constructed
of hardened stainless steel for long service life.
B
- CARBIDE - Precision construction to accurately control
flow rates and pressure. Recessed to protect against damage.
C - FLOW STRAIGHTENER - An internal stainless steel
guide, stabilizing liquid turbulence to provide maximum spray integrity
and impact. (Optional) |
 |
| Part
No. |
Description |
| C11 |
1/8" NPT 7/16" Hex Length 0.75" |
|
 |
| Part
No. |
Description |
| C11S |
1/8” NPT 3/8” Hex Length 0.53” |
|
| Use in small nozzles and rotating blasters.
Carbide available in 0.1mm (0.004”) increments from 0.6 through
2.5mm. Flow straighteners not available in these inserts. |
 |
| Part
No. |
Description |
| SC12 |
1/4" NF 1/8" Internal Hex - Length
0.4" |
|
 |
| Part
No. |
Description |
| C12 |
1/4" NF 1/4" Hex - Length 0.45" |
|
 |
| Part
No. |
Description |
| SC13 |
3/8" NF 3/16" Internal Hex - Length
0.60" |
|
 |
| Part
No. |
Description |
| C13 |
3/8" NF 3/8" Hex - Length 0.7" |
|
| Use in most Shamrock standard inserted nozzles
(Sand, Grease, Ultimate Penetrators, Grenades, Cobia, Skid Nozzles,
Boat, Dolphin, Finned Fantail and Silver Shark). Carbide available
in 0.1mm (0.004") increments from 0.7mm through 3.6mm. Flow
straightener available in Part No. C13. |
| |
|
|
Use in Shamrock high pressure nozzles such as the Shamrock-etr
and specialty tools. Carbide available in 0.1mm (0.004")
increments from 0.7mm through 3.6mm.
| Part
No. |
Description |
| C14 |
1/2" NF 1/2" Hex - Length 0.8" |
|
 |
May be used in standard carwash guns for 0° strong, straight
water stream. Flow straightener optional
| Part
No. |
Description |
| C17 |
1/4" NPT 9/16" Hex - Length 0.93" |
|
 |
Use in nozzles for hydro excavating in industrial applications
requiring long, straight water jet; Flow Straightener standard.
Carbide available in 0.1mm (0.004") increments 0.7 through
3.6 mm; When ordering, specify flow (gpm) and pressure (psi).
Available up to 15,000 psi.
| Part
No. |
Description |
| C17-HH |
1/4" NPT 9/16" Hex - Length 2" |
|
 |
Lance Tip Insert
| Part
No. |
Description |
| 85-12 |
3/8" NC 7/16" Hex; Hardened stainless
steel; Length 2.25"; Extra penetration from four 15°
water jets and one forward jet. Use in all Shamrock lance
tip nozzles. |
| 85-12A |
3/8" NF thread |
|
|
|
|
