Owen Equipment: Rotating Nozzles

CAREERS | SITE MAP | HOME

NOZZLES » ROTATING NOZZLES

Rear Spray Rotating (RR) Blaster™

Part No.	Description
RR	Self rotating and thrusting Heat-treated stainless steel, polished and ground for maximum service life; Replaceable carbide jet inserts; Pipe skid recommended; Fixed 18° rear thrust jets advance nozzle in a corkscrew motion through clogged pipe. Dual-action of rear spray thrusts nozzle forward while flushing away loose debris. Four rotating water jets impact pipe wall at 30° angle.

Hose Size	Thrust Jets	Part No.	Nozzle Dimension in Inches
1/2"	3	RR-8	1.6 dia x 2.8
3/4"	4	RR-12	2 dia x 3.5
1"	4	RR-16	2.5 dia x 4

Forward Rotating Combi (FRC) Blaster™

Part No.	Description
FRC	Four rotating water jets - two impact pipe wall with 30ø forward spray while two produce 90ø jet stream to loosen sidewall buildup and debris.

Hose Size	Thrust Jets	Part No.	Nozzle Dimension in Inches	Weight in Pounds
1/2"	3	FRC-8	1.6 dia x 2.8	1.5
3/4"	4	FRC-12	2 dia x 3.5	2.5
1"	4	FRC-16	2.5 dia x 4	3.5

Rear Rotating Combi Blaster™

Part No.	Description
RRC	Four rotating water jets - two impact pipe wall with 30° rear spray while two produce 90° jet stream to loosen sidewall buildup and debris. 30ø rear spray thrusts nozzle forward while flushing away loose debris.

Hose Size	Thrust Jets	Part No.	Nozzle Dimension in Inches	Weight in Pounds
1/2"	3	RRC-8	1.6 dia x 2.8	1.5
3/4"	4	RRC-12	2 dia x 3.5	2.5
1"	4	RRC-16	2.5 dia x 4	3.5

SPECIFY GPM, PSI, HOSE LENGTH AND IF YOU REQUIRE A FORWARD JET WHEN ORDERING.

ENZ Bulldog Rotating Nozzles

The enz golden jet® Bulldog Rotating Nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recy-cled water. An integrated oil-braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum of Ø 0.04". Transport and water costs are noticeably reduced. The Bulldog Rotating Nozzle is very easy to handle and the tool is practically maintenance-free. Max. working pressure: 3000 PSI

Part #	Connection thread	Applicability Ø	min. flow at 2000PSI	Nozzles	Measures
400.040	1/2" NPT	2.5" - 6"	13 GPM	4 Rotation 3 Thrust 1 Front jet	Ø1.7" x 3.8" 1.3 lbs
400.060A 400.060B	3/4" NPT 1" NPT	4" - 12"	26 GPM	4 Rotation 3 Thrust 1 Front jet	Ø2.4" x 5.1" 3.7 lbs
400.100A	1" NPT	8" - 24"	50 GPM	2 Rotation FanJet 3 Thrust 1 Front jet	Ø4" x 9.4" 18.5 lbs

RGS RADIAL RotoJet Nozzle

The enz golden jet® Radial RotoJet Nozzle is equipped with 4 - 90° jets, along with 3 thrust jets which provide advance force and debris flushing action. The rotational speed is controlled by a drive and brake jet arrangement. No thrust jets are necessary when cleaning downward in a strongly inclined pipe or when pulling the nozzle by means of swivel hook and cable. In these cases more water capacity is available for cleaning. The radial jet arrangement and the strong jet impact, clean any type of pipe including cross-holes. The RGS Nozzles are ideal for:

Removal of hard deposits
Cleaning of perforated drain pipes, and
Cleaning of laterals Max. Working pressure: 4000 PSI

Part Number	Connecting Thread	Pipe Dia. Range	Min. GPM at 2000 PSI	Nozzles	Measures
01.028	1/4"	1.5"...4.0"	6	Rotating inserts: 4xCeramic M4 Thrust inserts: 3xCeramic M4	Ø1.1x2.4" 0.44 lbs.
01.040	1/2"	2.5"...6.0"	11	Rotation inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M6	Ø1.6x3.3" 1.21 lbs.
01.050A 01.050B	1/2" 3/4"	3.5"...8.0"	18	Rotation inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M6	Ø2.0x4.0" 2.4 lbs.
01.060	1"	4.0"...12"	26	Rotation inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M8	Ø2.4x4.6" 3.5 lbs.
01.100A	1"	8.0"...24"	50	Rotation inserts: 4xJetMaxCeramic M10 Thrust inserts: 3xJetMaxCeramic M10	Ø4.0x7.1" 16.3 lbs.

HRH Semi Radial RotoJet Nozzles

The HRH enz golden jet® Semi Radial RotoJet Nozzle has 4 - 45° retro jets, which provide the cleaning energy as well as the advance thrust and flushing action. This minimizes water consumption and maximizes cleaning and flushing. With the water capacity provided, optional thrust jets can facilitate upward cleaning. The HRH enz golden jet® nozzle is especially suitable for the streak free cleaning and flushing large amounts of loose debris. The HRH nozzles are ideal for: - Cleaning pipes for TV-Inspection - Removal of chalky layers, cement slurry, grease and sludge - Removal of fine hair roots Max. Working Pressure: 4000 PSI

Part number	Connecting thread	Pipe dia. range	min. GPM at 2000 PSI	Nozzle	Measures
02.028A 02.028B 02.028AS	1/4" 3/8" 1/4"	1.5"...4.0"	2.5 2.5 3.5	Rotating inserts: 4xCeramic M4 Thrust inserts: 3xCeramic M4 (only AS)	Ø1.1x2.4" 0.44 lbs.
02.040A 02.040B 02.040AS	1/2" 1/4" 1/2"	2.5"...6.0"	4.5 4.5 5.5	Rotating inserts: 4xCeramic M6 Thrust inserts:3xCeramic M6 (only AS)	Ø1.6x3.3" 1.21 lbs.
02.050A 02.050B 02.050AS 02.050BS	1/2" 3/4" 1/2" 3/4"	3.5"...8.0"	11	Rotating inserts: 4xCeramic M6 Thrust inserts:3xCeramic M6 (only AS,BS)	Ø2.0x4.0" 2.4 lbs.
02.060	1"	4.0"...12"	16	Rotating inserts: 4xCeramicM6 Thrust inserts: 3xCeramic M8	Ø2.4x4.6" 3.5 lbs.
02.100A	1"	8.0"...24"	26	Rotating inserts: 3xJetMaxCeramic M10 Thrust inserts: 3xJetMaxCeramic M10	Ø4x7.1" 16.3 lbs.

HRV Semi Radial Forward RotoJet Nozzles

The enz golden jet® Semi Radial Forward Nozzle is equipped with 4 – 45° forward jets. As a result, this nozzle must either be equipped with extra thrust jets or be mounted on a lance. The forward jets disintegrate most any residue and flush the debris ahead of the nozzle. The HRV nozzles are ideal for: Core - flushing of steel pipes during hydraulic thrust boring Clearance of ice in pipes and manholes Cleaning of laterals from inside of the house toward the mainline Max. Working Pressure: 4000 PSI

Part number	Connecting thread	Pipe dia. range	min. GPM at 2000 PSI	Nozzle	Measures
03.028	1/4"	1.5"...4.0"	8	Rotating inserts: 4xCeramic M4 Thrust inserts: 3xCeramic M4	Ø1.1x2.4" 0.44 lbs.
03.040	1/2"	2.5"...6.0"	13	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M6	Ø1.6x3.3" 1.21 lbs.
03.050A 03.050B	1/2" 3/4"	3.5"...8.0"	18	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M6	Ø2.0x4.0" 2.4 lbs.
03.060	1"	4.0"...12"	26	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M8	Ø2.4x4.6" 3.5 lbs.
03.100A	1"	200-600mm	50	Rotating inserts: 4xJetMaxCeramic M10 Thrust inserts: 3xJetMaxCeramic M10	Ø4.0x7.1" 16.3 lbs.

KBR Combination RotoJet Nozzles

The enz golden jet® Combination RotoJet Nozzle is a true all-purpose nozzle for the cleaning of sewer lines as well as adjoining lateral pipes at any angle.

Part number	Connecting thread	Pipe dia. range	min. GPM at 2000 PSI	Nozzle		Measures
04.012 04.012A 04.012B	1/8" M7 M8	0.55"...1.2"	3	Nozzle orifices: 2x0.8mm, 90° 2x0.9mm, 45°		Ø0.47x1.2" 0.037 lbs.
04.016A 01.016B	1/8" 1/4"	0.70"...2.4"	3	Nozzle orifices: 4x0.7 - 1.1 mm drilled		Ø0.63x1.3" 0.066 lbs.
04.028A 04.028B 04.028AS	1/2" 3/4" 1/2"	1.5"...4.0"	3	Rotating inserts: 4xCeramic M4 Thrust inserts: 3xCeramic M4 (only AS)		Ø1.1x2.4" 0.44 lbs.
04.040A 04.040B 04.040AS	1/2" 3/4" 1/2"	2.5"...6.0"	6	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M6 (only AS)		Ø1.6x3.3" 1.21 lbs.
04.050A 04.050B 04.050AS 04.050BS	1/2" 3/4" 1/2" 3/4"	3.5"...8.0"	18	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M6 (only AS,BS)		Ø2.0x4.0" 2.4 lbs.
04.060	1"	4.0"...12"	20	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M8		Ø2.4x4.6" 3.5 lbs.
04.100A	1"	8.0"...24"	26	Rotating inserts: 4xJetMaxCeramic M10 Thrust inserts: 3xJetMaxCeramic M10	Ø4.0x7.1" 16.3 lbs.

KBRV forward Combination RotoJet Nozzle

The enz golden jet® Forward Combination RotoJet Nozzles combine 2 - 90° jets with 2 - 45° forward jets. As a result, this nozzle must either be equipped with extra thrust jets or be mounted on a lance. The forward jets disintegrate most any residue and flush the debris ahead of the nozzle. Max. Working Pressure: 4000 PSI.

Part Number		Connecting thread	Pipe dia. range	min. GPM at 2000 PSI	Nozzle	Measures
	04.012V 04.012AV 04.012BV	1/8" M7 M8	0.55"...1.2"	3	Nozzle orifices: 4x0.7 - 1.1mm	Ø0.47x1.2" 0.037 lbs.
	04.016AV 04.016BV	1/8" 1/4"	0.70"...2.4"	3	Nozzle orifices: 4x0.7 - 1.1mm	Ø0.63x1.3" 0.066 lbs.
	04.028AV	1/4"	1.5"...4.0"	5	Rotating inserts: 4xCeramic M4 Thrust inserts: 3xCeramic M4	Ø1.1x2.4" 0.44 lbs.
	04.040AV	1/2"	2.5"...6.0"	8	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M6	Ø1.6x3.3" 1.21 lbs.
	04.050AV 04.050BV	1/2" 3/4"	3.5"...8.0"	18	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M6	Ø2.0x4.0" 2.4 lbs.
	04.060V	1"	4.0"...12"	26	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M8	Ø2.4x4.6" 3.5 lbs.
	04.100AV	1"	8.0"...24"	50	Rotating inserts: 4xJetMaxCeramic M10 Thrust inserts: 3xJetMaxCeramic M10	Ø4x7.1" 16.3 lbs.

RotoPuls Vibration Nozzle RotoPuls™ Vibration Nozzles

The KBR RotoPuls nozzle is based again on an eccentric rotor creating high impact pulsating water jets and mechanical forces. The resulting impact forces are so high they disintegrate and flush away up to 4-inch thick pipe deposits. In many cases, Rotopuls nozzles can replace the use of Percussion Milling Cutters or Rotating Chain Scrapers. Caution: RotoPuls nozzles develop strong hydraulic pressure impulses, which could lead to damage in clay pipes. Therefore, it is important that Rotopuls nozzles are only used in Steel, Cement and Thick Walled Polyethylene pipes. Max. Working Pressure: 4000 PSI

Part Number		Connecting thread	Pipe dia. range	min. GPM at 2000 PSI	Nozzles	Measures
	02.100AE HRH	1"	8.0"...24"	26	Rotating inserts: 4xJetMaxCeramic M10 Thrust inserts: 3xJetMaxCeramic M10 forward insert on request	Ø4.0x7.1" 16.3 lbs.
	04.040AE KBR	1/4''	2.5"...6.0"	5	Rotating inserts: 4xCeramic M4 Thrust inserts: 3xCeramic M6 forward insert on request	Ø1.6x3.3" 1.14 lbs.
	04.060E KBR	1"	4.0"...12"	25	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M8 forward insert on request	Ø2.4x6.7" 5.4 lbs.
	04.060EK KBR	1"	4.0"...12"	25	Rotating inserts: 4xCeramic M6 Thrust inserts: 3xCeramic M8 forward insert on request	Ø2.4x4.6" 3.5 lbs.
	04.100AE KBR	1"	8.0"...24"	26	Rotating inserts: 4xJetMaxCeramic M10 Thrust inserts: 3xJetMaxCeramic M10 forward insert on request	Ø4.0x7.1" 16.3 lbs.

Whirlaway Nozzle (Brass)

This nozzle (2-1/2" Dia.) is attached to a fire hydrant hose and is useful for cleaning lines up to 30" in diameter when high volume and low pressure water will do a good job. Forward Jet.

Part No.	Hose Size	Degrees	With Root Cutter	Diameter	Length
30	2-1/2"	45°	No	3-5/8"	9”
40	2-1/2"	45°	Yes	3-11/16"	9”
55	1-1/2" NPT	45°	No	2-1/2"	5-1/2”
55	1-1/2” NST	45°	No	2-1/2”	5-1/2”