 |
Grease
| Part
No. |
Description |
| 39-E (¾” NPT) |
A smooth, streamlined 30° nozzle designed to penetrate and clear
blockages. Replaceable carbide inserts for long service life.
Wear-resistant, bar stock aluminum. 2-1/4" diameter x 7-1/2"
long. 5 rear jets. |
| 39-F (1”
NPT) |
A smooth, streamlined 18° or 30° nozzle (specify) designed to
penetrate and clear blockages. Replaceable carbide inserts for
long service life. Wear-resistant, bar stock aluminum. 2-1/4"
diameter x 7-1/2" long. 6 rear jets. |
|
 |
12°
Steel Sand
| Part
No. |
Description |
| 65F 1” NPT) |
Short nozzle to penetrate grease,
roots, sand, and sludge. Alloy steel. Six rear jets, Two side/front
jets; 2" diameter x 2-3/4" long |
|
 |
18° Super Flusher
| Part
No. |
Description |
| 80 |
Heavy duty nozzle for mainline work
in 8" or larger pipe. Jets angled for combined flushing
and penetrating. Alloy Steel. Six rear jets. 2-1/4" diameter
x 4-1/2" long. Weight 2 lbs. |
|
 |
18° Super Flusher with Lance Tip
| Part
No. |
Description |
| 80-15 |
Alloy Steel; Six rear jets, Five
forward jets. 2-1/4" diameter x 6" long. Weight 2
lbs. |
|
 |
Radial Vortex
| Part
No. |
Description |
| 32 |
Alloy steel, general purpose pipe
cleaning nozzles. Forward jet standard (available without forward
jet on request). Weight 1 lb. For penetrating hard soap, grease
plugs or root masses. |
|
 |
Twister
| Part
No. |
Size |
Description |
| TW-12 TW-16 |
¾” Hose 1” Hose |
Twister-A front rotating 20ø jet
of water disintegrates grease, soap, ice, hair and roots on
contact. Perfect for traps, 90ø bends, as well as straight pipe.
Alloy steel with two-piece front ceramic rotating cone.Eight
rear jets |
|
 |
Radial Short
| Part
No. |
Description |
| 30 |
Short, general purpose,
flushing nozzle with 30° wide angle rear jets to clean sidewalls
efficiently. Forward jet standard (available without forward
jet on request) Alloy Steel. |
Hose
Size |
Number of
Rear Jets |
Nozzle Dimensions
in Inches |
| ¾” |
5 |
1-9/16 dia x 2 long |
| 1” |
6 |
1-7/8 dia x 2-3/4
long |
| 1 ¼” |
10 |
2.2 dia x 3-5/16 long |
| Part
No. |
Description |
| 30-SS |
Short, general purpose,
flushing nozzle with 30° wide angle rear jets to clean sidewalls
efficiently. Forward jet standard (available without forward
jet on request) Stainless Steel. |
Hose
Size |
Number of
Rear Jets |
Nozzle Dimensions
in Inches |
| 1" |
10 |
2.2 dia x 3 5/16” long |
| Part
No. |
Description |
| 31 |
Short, general purpose,
flushing nozzle with 45° wide angle rear jets to clean sidewalls
efficiently. Forward jet standard (available without forward
jet on request) Alloy Steel. |
Hose
Size |
Number of
Rear Jets |
Nozzle Dimensions
in Inches |
| ¾" |
5 |
1-9/16 dia x 2 long |
| 1" |
6 |
1-7/8 dia x 2-3/4
long |
|
 |
Radial C (carbide)
| Description |
| Heat treated alloy steel
general purpose 30° sanitary nozzle. Eight rear replaceable
carbide inserts. Forward jet standard (available without forward
jet on request) 2" diameter x 3-1/4" long; Nozzles
for 80 gpm and greater have 10 rear jets. |
| Part No. |
Number of
Rear Jets |
Hose Size |
| 84-E |
8 |
¾” NPT Hose |
| 84-F |
8 |
1” NPT Hose |
|
 |
Universal Penetrator
Alloy steel nozzles with drilled rear jets positioned
for streamlined penetration of root fiber, hard grease and other
blockages. Variety of front jet styles fit different tasks. Nozzles
for use at 80 gpm and greater all have 10 rear jets.
| Hose
Size |
Number
of
Rear Jets |
Rear
Jet
Angle |
Nozzle
Dimension
in Inches |
| ¾” NPT |
5 |
15° |
1-3/4 dia x 2-5/8 long |
| 1” NPT |
6 |
20° |
2 dia
x 3-5/16 long |
| Part No. |
Description |
| 33 |
Single
forward jet. Rear jets at 20° |
| 33-12 |
Drilled lance tip to impact
side of pipe and push through blockages. Four side jets at 22° |
| 33-13 |
Performs
best on ice/grease. Steep angled (5°) front jets push debris
forward and penetrate hard blockages. |
| 33-14 |
With pulling eye. No forward
jet. |
| 33-15 |
With
inserted lance tip. Four side jets at 15°,one forward jet. |
|
|
|
|
|
|
|
 |
Super Grenade Penetrator
| Part
No. |
Description |
| 64 |
Heavy duty nozzle for
mainline work. Engineered to stay in pipe bottom. Rear jets
have replaceable carbide inserts and optional flow straighteners
for long service life. |
Hose
Size |
Number of
Rear Jets |
Rear Jet
Angles |
Nozzle Dimension
in Inches |
Weight
in Pounds |
| ¾” NPT |
5 |
12° |
2-1/4 dia x 3-7/8 |
3-1/4 |
| 1” NPT |
6 |
12° |
2-5/8 dia x 4-1/4 |
3-1/2 |
| 1 ¼” NPT |
8 |
12° |
3-1/4 dia x 5-1/2 |
7 |
|
 |
Sand & Sludge
| Part
No. |
Description |
| 35 |
Aluminum alloy nozzle
engineered to sweep 6" and larger pipes. Rear jets have
replaceable carbide inserts and optional flow straighteners
for long service life. Eight dual degree rear jets (17°/24°) |
Hose
Size |
Nozzle Dimension
in Inches |
Weight in
Pounds |
| ¾” NPT |
4 dia. x 5 long |
2-1/2 |
| 1” NPT |
4-1/2 dia. x 6
long |
3 |
|
 |
Contractor Special
| Part
No. |
Description |
| 140 |
Twelve triple degree rear
jets 10°/17°/24° |
Hose
Size |
Nozzle Dimension
in Inches |
Weight in
Pounds |
| 1” NPT |
4-1/2 dia. x 6 long |
3 |
|
 |
Ultimate Penetrator
| Part
No. |
Description |
| 83 |
Heavy duty nozzle chosen
by contractors to clear sludge, mud, and debris from pipe bottom.
Replaceable carbide inserts for long service life. 12° rear
jets on most sizes. (available with forward jets upon request).
Practical pipe size 6 to 18 inches. |
For Hose
Size |
Number of
Rear Jets |
Nozzle Dimension
in Inches |
Weight
in Pounds |
| ¾” NPT |
5 |
2-1/2 dia x 12 |
8 |
| 1” NPT |
5 |
2-5/8 dia x 14 |
10 |
| 1 ¼” NPT |
8 |
3-1/4 dia x 15 |
22 |
|
 |
Shamrock-et
Shamrock-et's missile shape and smooth exterior
can be used to create a path for large flushing nozzle, or to blast
deposits of sand and gravel out of a pipe.
| Part
No. |
Description |
| 90 |
A streamlined nozzle for sweeping
6-18" pipe. Penetrates hair and root masses, hard grease
and soap. Laminar flow jets produce straight streams for 90%
flow efficiency. Heat treated alloy steel, plated for long service
life;Thrust fins with three large rear carbide jets set at 5°,
have flow straighteners;Forward jet standard; Long water paths
for smooth, straight backflow;4" diameter x 13" long;
Weight 12 lbs. |
|
| |
|
|
 Enz
golden jet® Standard Pipe Cleaning Nozzles. Especially suited for the removal of sludge and clogs in lateral pipes
and home  installations. Standard Pipe Cleaning Nozzles are made of
wear-resistant, hardened steel. Sturdy design with large wall thickness
provides a long service life even under severe wear and tear. The
nozzles are designed with a jet angle of 30º. Nozzles from 30.012
(1/8") through 30.0256 (1/4") have drilled jet orifices.
Nozzles from 30.038 (3/8") and up are equipped with ceramic lined
inserts with an optional front jet. Max. Working pressure: 4000 PSI |
| Part
Number |
Connection-
thread |
Pipe
dia.
range |
min.
GPM
at 2000 PSI |
Nozzle |
Measures |
 |
30.012 |
1/8" |
0.75"...4.0" |
2.6 |
4x0.7 or 0.8mm, 30° |
Ø0.63x0.71"
0.03 lbs. |
| 30.012F |
1/8" |
0.75"...4.0" |
2.6 |
4x0.7 or 0.8mm,
30°
Forward-jet: 0.7, 0.8mm |
Ø0.63x0.71"
0.03 lbs. |
 |
30.0253 |
1/4" |
1.0"...4.5" |
2.6 |
3x1.0mm, 30° |
Ø0.70x0.78"
0.04 lbs. |
| 30.0253F |
1/4" |
1.0"...4.5" |
2.6 |
3x1.0mm, 30°
Forward-jet: 1.0mm |
Ø0.70x0.78"
0.04 lbs. |
 |
30.0256 |
1/4" |
1.0"...4.5" |
2.6 |
6x0.7mm, 30° |
Ø0.70x0.78"
0.04 lbs. |
| 30.0256F |
1/4" |
1.0"...4.5" |
2.6 |
6x0.7mm,
30°
Forward-jet: 1.0mm |
Ø0.70x0.78"
0.04 lbs. |
 |
30.038 |
3/8" |
1.5"...6.0" |
2.6 |
6xCeramic M4, 30°
Forward-jet: 1xCeramic M4 |
Ø1.0x1.46"
0.13 lbs. |
 |
30.050 |
1/2" |
2.5"...8.0" |
13 |
6xCeramic M6,
30°
Forward-jet: Ceramic M6 |
Ø1.14x1.81"
0.25 lbs. |
 |
30.050EI |
1/2" |
2.0"...8.0" |
13 |
6xCeramic M6, 25°
Forward-jet: Ceramic M4 |
Ø1.57x2.0"
0.46 lbs. |
 |
35.050EI |
1/2" |
2.0"...8.0" |
13 |
6xCeramic M6,
25°
Forward-jet: 5xCeramic M4, 15° |
Ø1.57x2.0"
0.46 lbs. |
 |
30.075EI |
3/4" |
3.0"...10" |
13 |
6xCeramic M6
Forward-jet: M6 |
Ø1.89x2.36"
0.84 lbs. |
 |
30.100EI |
1" |
6.0"...14" |
13 |
8xCeramic M8
Forward-jet: M8 |
Ø2.37x3.28"
1.67 lbs. |
 |
30.125EI |
1 1/4" |
8.0"...15" |
50 |
8xCeramic M8
Forward-jet: M8 |
Ø2.68x4.13"
2.88 lbs. |
|
|
|
|
|
|
